canonip1000Many disappointed people has bought Canon Printer Pixma iP1000 Series, its caused the prints operation limited to be finite of certain time. So that, if had reached deadline which has been accumulated, these printer will be desist prints (indicator is blink) and you must bring it to Service Center for repair the printer. Don't worry with this problem, here I will give a few solutions for you.

Are you an technician of printer devices? or are you an home user? That's no problem, you can fixed the problem. If you found the problem, you might find this information useful. For more detail information to fixed the problem, see below :


These is step by step to fixed the problem with Canon Printer Pixma iP1000 Series :

Step 1 : Manual Reset Temporary


1. Turn off the printer and disconnect the printer cable.
2. Press and hold the POWER button then turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
6. Release both buttons.

Step 2 : Software Reset Permanent

1. Reconnect the printer cable.
2. Open General Tools Software.
3. Select USB Port and then select EEPROM CLEAR.
4. Finally, click SET DESTINATION iP1000.
5. The led printer will be blinking for few moment and it should be reset. See the picture.


Capture for General Tool Service Program, see below :




Download Link :
Ziddu : Download
Rapidshare : Download

For more detail information about of Canon Product, you can read here

Remark :

After manual service mode. Please, use software for permanent reset







Related Posts :



3 comments

  1. Anonymous // December 25, 2008 at 2:34 AM  

    harganya tambah murah ga ya

  2. Author's // December 26, 2008 at 8:19 AM  

    gombloh : kalo untuk type ini udah ngak ada yg jual baru lagi mas

  3. Car accident attorney Austin // January 25, 2013 at 9:45 PM  

    Thank you very much for the info. I have been looking for this info for the last few days. Your efforts are appreciated.

Post a Comment